Our paintless dent removal tools dent puller is a lightweight glue tab pulling tool, It not only for all kinds of cars dent removal, but also suitable for truck, Motorcycle, washing machine, Refrigerators and Hail damage and so on. No labor cost and paint material cost, our products are exactly designed to save your time and money. If you want to save money as well as enjoy the DIY time, thisT-bar dent puller tools could be your best choice.
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Choice the proper drawing gasket, you have 16 sizes gasket, Large dent requires a large drawing gasket.
4.Pull the trigger and apply the drawing gasket with extruded glue.
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter);
6.While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a knockdown tool.
8.Use alcohol and plastic shovel to clean up the residual glue.
*** THIS PRODUCT IS SHIPPED DIRECTLY FROM THE MANUFACTORY, PLEASE ALLOW 14-21 DAYS FOR THE PRODUCT TO BE DELIVERED TO YOU
Paiement et sécurité
Vos informations de paiement sont traitées de manière sécurisée. Nous ne stockons pas les détails de votre carte de crédit et n'avons pas accès à vos informations de carte de crédit.